Design process common stepts

Common settings:

Depth: 650 mm

Height and width vary depending on the dimensions of the space. Depth also can be less then 650 mm – in this case we must warn a customer that sliding doors will be catching  clothes hanging on rails. If depth physically can’t be 650 mm as a solution we can use pull-out cross hangers. In this case we have to make sure that a section where such hanger is placed should be at least 500 mm (20 inches) wide


  1. Side panels
  2. Side filler boards if necessary
  3. Floor and ceiling
  4. Doors
  5. Internal gables
  6. Back panels
  7. Shelves, drawers, hanging rails, pull out shoe shelves, etc.